Founded in 2008, Motobatt is a manufacturer of premium Powersports
batteries, battery chargers and battery related accessories. Motobatt is
the creator and holds patents all over the world for the Motobatt 4
terminal battery that facilitates flexible battery installation across a
wide variety of vehicles while maintaining an OE like
fit.

Features:

• Charges 2 batteries
  simultaneously


• 9 Step Algorithm


• Automatic Charging
  & Maintaining


• Overcharge Protection


• Reverse
  Polarity Protection


• Short Circuit Protection


• Spark
  Proof


• Enables ongoing battery maintenance


• Prevents
  battery sulfation


• Temperature compensated


• 72-hour
  safety
  timer

Specifications:

• Applicatio
  12V AGM, Lead-Acid, Calcium & Gel Batteries


• Input:
  Auto-switching 120-240VAC 50/60 Hz


• Output: 12VDC 2A per
  channel


• Max Charge Current: 2A


• Max Voltage:
  14.9V


• Battery Capacity: 4-100Ah

Motobatt chargers
utilise Motobatt’s unique 9 Stage Charging and Maintenance
Process.

Qualification Phase:

Initially
ensures that the battery is in good condition prior to launching charge
processing. As a safety measure charge process will not begin if the
battery is below 2V.

Battery Rescue
Phase:

Motobatt Battery Rescue starts if the battery
voltage has risen unusually high in the early portion of the re-charge
cycle. This is usually caused by plate sulfation. Once the battery rescue
phase has succeeded in getting the battery to accept power, normal battery
charging will begin.

Soft Start
Phase:

Soft Start is used when the charger has detected a
battery at a very low initial state of charge. Voltage and current are
delivered at specified rates to help the battery to recover prior to
entering Pulse charge mode.

Pulse Mode
Phase:

Motobatt Pulse mode provides a high-frequency pulse
charge to help the newly recovered battery to continue to accept charge as
it enters the reconditioning phase.

Recondition
Phase:

The Motobatt reconditioning phase continues to work
the battery at a slightly higher voltage and amperage to
“re-activate” the battery plates for improved depth of charge
and charge acceptance.

Bulk Charge
Phase:

With the battery now through Pulse and
reconditioning phases and well on its way to full recovery the Motobatt
bulk charge phase gives the battery constant current taking the battery up
to 80% of its capacity.

Absorption
Phase:

In the Motobatt absorption phase, the battery is
given constant voltage while the current is reduced based on action taken
from monitoring the batteries current state until the battery is 100%
charged.

Check Phase:

The battery will
now be checked to be sure that it is holding a charge properly and the
charger will make a determination and classify the battery for use, or
not.

Maintenance Phase:

The battery can
be safely left on the charger indefinitely. The unit will monitor the
battery and “turn-on” again as needed to maintain the battery
at a full state of readiness.